Product Line Series

Image

Description

Note:  If detailed product pages are available, the product name is underlined as an “active” link in the left column. Contact us for additional products or details on products described here.

MIL-C-38999.  This specification covers a series of miniature, high density, circular, electrical connectors. Deutsch produces three basic lines qualified to MIL-C-38999. They feature a high degree of standardization in that contacts, tools, materials, finishes, assembly procedures and basic design and performance characteristics are common to all three.

The Deutsch Series I version is a long shell, scoop-proof, bayonet coupling connector available in both environment resisting resilient and hermetic types.  These Series I connectors are intermateable and interchangeable with all other MIL-C-38999 Series I connectors.
(Click here for hermetic version.)

MIL-C-38999
Series III metal
(DTS)

Product Data Sheet
 

The Deutsch Series III version is a scoop-proof, threaded coupling connector with an anti-rotation device and RFI fingers for EMI (electromagnetic interference) protection.  The resilient version is available in this rugged environment resisting connector. Deutsch Series III connectors are intermateable and interchangeable with all other MIL-C-38999 Series III connectors.
(Click here for hermetic version.)

MIL-C-38999
Series III
Composite
(ACT)

Product Data Sheet
 

The Deutsch Series III ACT (Advanced Composite Technology) is the resilient version of this rugged environment resisting connector offering superior corrosion resistance through the elimination of electromotive force differentials between dissimilar metals. The use of composite materials increases the durability of the connector housing and coupling mechanism to 1500 cycles and results in an interconnection system that withstands over 2000 hours of salt spray. Intermateable and interchangeable with all other MIL-C-38999 Series III connectors.

MIL-C-38999
Series III
Composite
(ACT)
PCB Connectors
Product Data Sheet

Combining Mil-Spec reliability and performance with COTS technology and availability, the Deutsch ACT Boxer meets a full range of application needs, from flex circuit to rigid board mount termination.  Available as a stand-alone connector or pre-terminated to flex circuits or printed circuit boards to meet varying design needs.

Circuit Board Connectors - Technical Manual

Personalized, customized, or off-the-shelf Circuit Board Connector for versatility and proficiency. Simple solutions to complex simulation and testing needs: bussed wires in myriad arrangements offer countless ways to avoid costly rewiring.  The ideal solution for alternate configurations, feedback loops, and maximum versatility. Meets intermateability of MIL-C-38999, Series III; arrangements conform to MIL-STD-1560.  Metal or composite in shell sizes 9-11-13-15-17-19-23-25, depending upon shell size and desired bussing arrangements.  See technical manual for further details.

Deutsch ACT
Protective Covers (for 38999 III Composite and Metal)

Product Data Sheet
 

Low cost, high performance protection for MIL-C-38999 Series III receptacles and plugs. Intermates with 38999 Series III connectors.  Available in shell sizes 09 through 25; shielded and non-shielded; various mounting hardware and chain lengths available.

Lightweight strain reliefs for MIL-C-38999 Ser III
Composite

Product Data Sheet
 

The ACT Tie-Type composite Strain Relief has a secondary grommet for true strain relief and vibration dampening and provides dynamic moisture intrusion seals.

MIL-C-38999
Series IV
(DIV)

 Product Data Sheet
 

The Deutsch Series IV connector is scoop-proof with breech coupling, designed to give a quick disconnect coupling mechanism to an already rugged connector.  This environment resisting connector is recommended for all new design and is available in both resilient and hermetic versions. Deutsch Series IV connectors are intermateable and interchangeable with all other qualified MIL-C-38999 Series IV connectors.
(Click here for hermetic version.)

MIL-C-0026482 is the Navy’s latest specification specifically designed to eliminate failure modes characteristic of many previous devices. The Deutsch AFD series connectors represent the most advanced design in use which both reflects and sets the pace for future developments.

MIL-C-26482
Series 2
Product Data Sheet
 

Designated as Series II of MIL-C-26482, this miniature circular electrical connector supersedes MIL-C-83723 Series I devices.  It utilizes a bayonet coupling device and is intermateable and interchangeable with earlier MIL-C-26482 Series I connectors and MIL-C-83723 Series I connectors.

Deutsch offers this environment resisting connector in all four classes. The resilient version is available with real release crimp removable contacts, as well as the hermetic version with nonremovable solder type contacts.  The contacts range in size from 12 through 20.
(Click here for hermetic version.)

Deutsch AFD Composite Coupling Ring, RFI connector
88083 Connector Series
(shielded)
Product Data Sheet
 

Intermates with MIL-C-26482 receptacle connectors. Improved design over the MIL-C-26482 connector that can reduce costs, expand its applications, and improve durability. 88083 Connector Series

Deutsch AFD Composite Coupling Ring Connector
88092 Connector Series
(not shielded)

AFD Composite Coupling Ring Connector without the RFI ring. 88092 Connector Series

MIL-C-83723.  Deutsch DAO produces two basic versions of connectors qualified to MIL-C-83723 Series I and Series III. First to qualify to MIL-C-83723, Deutsch has developed three basic lines of connectors qualified to MIL-C-83723.  They feature a high degree of standardization:  contacts, tools, accessories, materials, finishes, assembly procedures and basic design and performance characteristics are common to all three Deutsch lines.  All three series are available with rear accessories: straight backshells, cable clamp backshells, or 90° end bell backshells.

MIL-C-83723
Series 1
Miniature
Series
Bayonet Coupling intermateable & intermountable with
MIL-C-26482

Product Data Sheet
 

Aluminum components are nickel plated or black anodize; resilient components are made of fluid resistant silicone which resists a permanent set and will not revert upon exposure to temperature extremes.  Plastic connector components are made of high-strength, electrical grade material.  All components are processed, manufactured, and quality-controlled in-house from raw material to finished product to assure exacting performance and high reliability.  Series 1 offers a variety of alternate insert clocking positions as well as alternate shell keying positions and is available in square flange, wide square flange, single hole, solder mount and cable connecting receptacles, along with hermetic versions of each. Prewired plugs and receptacles are also available.

MIL-C-83723 Series 3
Miniature

Bayonet
Coupling
intermateable
& intermountable with
MIL-C-26500
& MIL-C-38300

Product Data Sheet

 

All Deutsch MIL-C-83723 Series 1 and 3 connectors are available for size 20, 16, and 12 contacts for AWG wire sizes 20-24, 16-20, and 12-14 respectively in a variety of insert arrangements. Series 3 Bayonet Coupling Connectors are available in square flange, single hold, and solder mount receptacles.

The Series 3 Bayonet Coupling connector is available with square-flange or single-hole receptacles, with hermetic versions of each; solder- or single-hole mount receptacles with extended pins (hermetic); plugs are available with R.F.I. Grounding.
(Click here for hermetic version.)

MIL-C-83723
Series 3
Miniature

Thread
Coupling
Intermateable & intermountable with
MIL-C-26500 & MIL-C-38300 thread coupling type connectors

The 83723 Series 3 Thread Coupling connector is available with square-flange or single-hold receptacles or with square-flange hermetic, single-hole hermetic, or solder-flange hermetic receptacles.

Series 1 and 3 are available in resilient nonconductive, hermetic conductive, or resilient conductive finishes.

MIL-T-81714 Series II - Composite Termination System.  The Composite Termination System consists of a system of wires and components that are interconnected to one another by the use of a standard MIL-C-39029/22 socket contact only.  This eliminates the need for pin contacts which are located in the mating components. There are approximately twenty different devices that comprise the Common Termination System. These devices consist of a large variety modules, junctions, connectors, and rail assemblies.  We picture a few of these devices here.

Product Data Sheet
 

MIL-T-81714
Series II
Composite Termination
System
CTD Series
CTJ1 Series

The Deutsch composite system uses a rugged socket contact terminated to internal pin-buss bars.
The Deutsch CTD series module accents a large input current and distributes it through a pin-buss system to smaller feeder terminal strips and can be prewired to simplify final assembly.
Deutsch CTJ1 series modules series modules accommodate common busing of 6 to 20 contacts in a small area. Internal bussbars are configured to allow connections of various combinations of wires providing environmental resistance and vibration dampening.
 

MIL-T-81714 Series II
Composite Termination
System
CTJ7 and
CTG Series
Grounding
Modules

The Deutsch CTJ7 Series and CTG Series are grounding modules for applications that require a small, rugged device that also offers sealing and assembly ease.
The Deutsch Common Termination System Series Grounding Module (CTJ7 Series) provides an excellent method of grounding multiple wires to a common location.  It accepts M39029/22 crimp-type sockets that mate with internal pins on a rugged bus bar contained in a sealed plastic housing. The one-piece construction is small, lightweight, dissipates heat, is shock and vibration resistant, and has an extremely low voltage drop.
For grounding single wires, the Deutsch Common Termination Grounding Series adapter, a threaded stud mounting junction, accepts a single M39029/22 socket contact. It, too, has an environmental seal.  It can also be used to adapt any electromechanical component using screw type terminations. (The threaded stud can replace the screw terminals.)

MIL-T-81714 Series II
Composite Termination System
CTL Series
CTM Series
CTN Series

The Deutsch Inline Junction (CTL) is used to connect two wires inline utilizing crimp-type contacts. The junction can then be placed in a wire bundle without being mounted.
The Multi-Junction (CTM) connects and busses four wires. It can be used to replace “Y” splices and terminal strips.
The Electronic Multi-Junction (CTN) is an inline device that houses and shields any passive or active components, including fuses, resistors, diodes, capacitors, etc.

MIL-T-81714
Series II
Composite
Termination
System
CTJ4 Series

The CTJ4 Electronic Component Module offers crimp-tool terminations and a housing system for discrete components and circuits.  Each module houses small printed circuit boards incorporating diodes, resistors, capacitors, relays, fuses, etc.  The input/output wiring is sealed with a silicone rubber grommet. This packaging technique allows designers to include circuits in a system that would be considered environmentally hazardous. For example, transient suppression devices can be placed in or near the system or harness they were designed to protect. Other applications include rectifying, filtering, voltage clamping, and arc-suppression.

MIL-T-81714 Series II
Socket Contacts

Product Data Sheet
 

The most rugged contact in the industry designed to MIL-C-39029/22. The Deutsch Composite System is designed to use MIL-C-39029/22 contacts. These Deutsch contacts are designed with a protected or hooded entry providing increased durability during handling.  Actual termination to the wire is accomplished by crimping, thus insuring reliability.
Reduced crimp barrel diameters are available to accommodate a variety of wire sizes. These contacts can be provided with extended life plating. Consult factory for further information.
Inside each composite module is a high technology cold extruded pin type bussbar.  As each socket contact is inserted into a composite component it mates with this extruded pin allowing “pin and socket” engagement.

Composite Termination System -

CTJ6 Series Plugs

CTJ9 Series Receptacles

(meet
AFLC 8027520 specs)

Product Data Sheet

Small, lightweight modules designed or flange mounting for inline mounting for simultaneous connect/disconnect of many wires.

AFLC8810310 ABC Connectors.  The Deutsch ABC Composite Rectangular Interconnection System has three simple elements:  1-lightweight, corrosion-proof shells; 2-versatile, easily removable composite modules that accept wire sizes 22, 20, 16 and 12 AWG; and 3-field-proven, crimp-type contacts that offer exceptional durability.

AFLC8810310
ABC Connectors
Composite Rectangular Interconnection System
ABC Module Arrangements

Product Data Sheet
AFL8810310 ABC Series

Product Data Sheet
ABC Inline Series
 

ABC modules can be used in any combination within the same shell, thus allowing extensive customization for specific applications.
Each module holds the contacts in place with a unique contact retention system.  For environmental protection, a silicone rear grommet with a triad wire seal and a cork-in-a-bottle interfacial seal are featured.
The ABC system uses solderless, rear-release, cirmp-type MIL-C-39029 contacts.  Each ABC connector has a 1,500-cycle durability rating due to the Deutschcoat V high-lubricity coating process used on the contacts.

High Density Bayonet Locking MIL-C-81511 Connector.  The Deutsch 815 Series features an individual Contact Release system ((ICR), which permits each crimp-type contact to be individually inserted, released and extracted from the rear of the connector in the coupled or uncoupled position.  during contact insertion, there is a positive feel when the contact reaches the locked position. 

MIL-C-81511 High Density Bayonet-locking Connector

Product Data Sheet
 

The Deutsch 815 Series connectors are intermateable and intermountable with earlier versions of MIL-C-81511.  However, the shorter contacts of the Deutsch connector should not be intermixed with those of Series 1 and 2 connectors.

The scoop-proof features of these connectors prevents damage to pin contacts if the mating half of the connector is accidentally wiped across the connector front.  The 815 connectors are available in two versions:  the long-shell version (50% scoop-proof) and the short-shell version, which will prevent scooping damage providing the pin contacts are used in the receptacle half of the connector.  The long-shell version will prevent scooping damage with the pins used in either the plug or the receptacle.
(Click here for hermetic version.)

MIL-C-29600 Series A and B.  The Deutsch DG123 advanced composite interconnection system provides today’s engineer with solutions for tomorrow’s design requirements.  Available in a multitude of shell sizes and mixed insert arrangements, the DG123 system includes field terminable fiber optic and data bus contacts, lanyard release plugs, and a vast array of high-performance, lightweight rear accessories. The DG123 interconnection system is capable of withstanding highly corrosive environments while providing outstanding EMI protection and lighter weight.  These key features, combined with the increased durability of the DG123 system, result in extended life cycle cost savings.

Product Data Sheet
Series A
 

MIL-C-29600 Series A
Series B
Composite Connector System
DG123 System

Product Data Sheet
Series B

The heart of the DG123 system is the contact, a design based on proven MIL-C-39029 configurations and utilizing an advanced Deutsch manufacturing process to produce a contact rated to 1500 cycles of durability, three times the life of a standard contact. 

MIL-C-29600 Series A connectors conform to MIL-C-39029/106A standards and are available in shell sizes and mixed insert arrangements for contact sizes 12, 16, 20, and 22D.

MIL-C-29600 Series B connectors conform to MIL-C-29600/23 standards and are available in shell sizes and mixed insert arrangements for contact sizes 12, 16, 20, and 23.

MIL-STD-1760:  The Deutsch Mil-STD-1760 Aircraft/Store Electrical Interconnection System (AEIS). Deutsch has taken the benefits of advanced composite technology and applied them to the mission-critical Mil-STD-1760 (AEIS) system.  Our lanyard release connectors offer a tested and proven interface for controlling and monitoring of aircraft stores and other aircraft subsystems. This allows increased levels of performance in the areas of corrosion resistance, weight savings, and durability. 

LANYARD RELEASE

Lanyard Release Plugs - Type 3 Composite and Type I Metal for MIL-C-38999

RAIL LAUNCH

Type 2 Rail Launch for Military #M83538/1, /3, and /4

COMPOSITE PLUGS AND RECEPTACLES FOR MILITARY #38999

Composite Plug

Composite Jam Nut Receptacle

Composite Square Flange Receptacle

METAL PLUGS AND RECEPTACLES FOR MILITARY #38999

Metal Plug for Military #38999

Metal Jam Nut Receptacle for Military #D38999

Metal Square Flange Receptacle for Military #38999

COMPOSITE ACCESSORIES

Composite 90° Round Back Shell

Composite Over Mold Adapter

Twinax Wire Comb

Dummy Contacts

Contacts. The contacts used in the Deutsch Mil-STD-1760 (AEIS) connectors have been upgrraded and engineered to reduce piece parts and provide a simple, more reliable assembly while maintaining Military qualification to the M39029 specification.  As an example, the size 12 Coax contacts, M39029/102 and M39029/103, have only three components...fewer parts equals faster and simpler assembly, reduced training, and increased reliability.

Military M39029 Contacts

Assembly Instructions:

1760 Shielded

Data Bus

Deutsch manufactures a full line of M39029 contacts in sizes 8-20 for Twinax, Shielded, Coax Cable and 16-20 and 20-24 Size AWG.

Deutsch RE Series
Sub-Miniature
Rectangular
Connectors
Product Data Sheet
 

For Maximum Connector Density. Used for rugged environmental applications.  Size 16 or 22 contacts; shell sizes 1,2,3,4,6 and 7; environmental or non-environmental versions.

Deutsch AG Series
Grounding Backshells
Product Data Sheet
 

Deutsch AG Series Grounding  Backshells offer versatility, serviceability, and ease of assembly.

All wires become fully accessible without having to re-qualify individual grounds each time the backshell is uncoupled.

Available for:
MIL-C-83723, Series III
MIL-C-26482, Series II
MIL-C-5015
MIL-C-38999, Series I, II
MIL-C-38999, Series III, IV
MIL-C-81511, Series III, IV
MIL-C-29600, Series B
 

REFERENCE SECTION

Assembly Instructions

Contact Insertion, Contact Crimping, Contact Removal

Contact Cross Reference

Contacts, Tools and Sealing Plugs

Tool and Contact Guide

Cross-Reference Chart

Please contact your local Deutschman for bulk contacts.